Hi,
Firstly, I assume you have replaced a laptop drive in a Mac Laptop before. If not, then the following needs to be discussed. Firstly, in most Mac Laptops that have IDE (or SATA) drives that are intended to be used in MacOS-X, it is necessary to make the CD "Master" and the HD the "slave" The CD is the original in your machine so the hard drive has to be tagged to be "slave". If not, the CD won't boot a bootable CD disk, because it will be sharing the "Master" access with the hard drive. In many very new Macs, the factory is also beginning to use "Chip Select", which allows the on-board controller to sort things out, easier. It's up to you. The extra setup pins on the hard drive determine all that, and it is a good idea to contact the hard drive maker to get the pegging instructions, as they vary a bit (although less so than for 3.5 inch drives). Also check out the label on he drive, pegging instructions are often printed right on it.
Nextly, a new drive MUST be reformatted using Drive Setup (the Apple Utility) located on your original OS CD/DVD. Reformatting the new drive is necessary because all hard drives are formatted at the factory to be recognized by Windows, which is often a Mac no-no. The system optical plate is bootable, if it won't then see the above and study it.
Booting from an optical plate, MUST be operational, otherwise you cannot proceed further. Once the new hard drive is formatted, you can copy your old drive contents, if available via Carbon Copy Cloner, or you can reinstall the MacOS from your original install CD/DVD, and then use the automatically called migration assistant to copy your personal data, applications, and user created files automatically from your backup, or contents of old drive.
No Backup? No readable original drive? Then you are bluntly out of luck, and you start fresh.
Hope that helps. For newcomers, no such thing as loading just any CD in the drive and booting. CD must have a bootable OS on it, and the boot track must contain a valid disk driver (usually created at the time the disk is made [most utilities that make bootable CD's set this stuff up]). Good idea, when in doubt, to cold start the machine and then hold down the "C" key. This forces the firmware to start the CD search from scratch, which is a good thing, and follows the Apple recommendations to the letter <grin>.
Firstly, I assume you have replaced a laptop drive in a Mac Laptop before. If not, then the following needs to be discussed. Firstly, in most Mac Laptops that have IDE (or SATA) drives that are intended to be used in MacOS-X, it is necessary to make the CD "Master" and the HD the "slave" The CD is the original in your machine so the hard drive has to be tagged to be "slave". If not, the CD won't boot a bootable CD disk, because it will be sharing the "Master" access with the hard drive. In many very new Macs, the factory is also beginning to use "Chip Select", which allows the on-board controller to sort things out, easier. It's up to you. The extra setup pins on the hard drive determine all that, and it is a good idea to contact the hard drive maker to get the pegging instructions, as they vary a bit (although less so than for 3.5 inch drives). Also check out the label on he drive, pegging instructions are often printed right on it.
Nextly, a new drive MUST be reformatted using Drive Setup (the Apple Utility) located on your original OS CD/DVD. Reformatting the new drive is necessary because all hard drives are formatted at the factory to be recognized by Windows, which is often a Mac no-no. The system optical plate is bootable, if it won't then see the above and study it.
Booting from an optical plate, MUST be operational, otherwise you cannot proceed further. Once the new hard drive is formatted, you can copy your old drive contents, if available via Carbon Copy Cloner, or you can reinstall the MacOS from your original install CD/DVD, and then use the automatically called migration assistant to copy your personal data, applications, and user created files automatically from your backup, or contents of old drive.
No Backup? No readable original drive? Then you are bluntly out of luck, and you start fresh.
Hope that helps. For newcomers, no such thing as loading just any CD in the drive and booting. CD must have a bootable OS on it, and the boot track must contain a valid disk driver (usually created at the time the disk is made [most utilities that make bootable CD's set this stuff up]). Good idea, when in doubt, to cold start the machine and then hold down the "C" key. This forces the firmware to start the CD search from scratch, which is a good thing, and follows the Apple recommendations to the letter <grin>.
No comments:
Post a Comment